TEX ATEX Zone 1 Motors
TEC EExde Motors are certificated according to international standards HRN EN 50014, HRN EN 50018, HRN EN 50019 and EN 50281-1-1 by Ex-Agency of Republic of Croatia (Agency for Areas Endangered by an Explosive Atmosphere) and CESI Italy. TEC explosion-proof motors are of the highest quality constructed from premium quality materials of robust design, high IP protection, sealed for life bearings, weather and corrosion-proof paint and insulation system of high dielectric strength suitable for frequency converters. Each explosion-proof motor is marked in accordance with EN 50014 standard with rating plate which contains data for explosion-proof protection. TEC electric motors have an in house expert in the field of Explosion Proof motors therefore, if you have any questions just ask!
Standard Design Series: 5AT 71-112 In ailuminum die casted finned frames with feet and terminal box casted together, shields from cast iron Series: 7AT 132-280 Frame In cast iron finned frames, detachable feet, shields and terminal box from casted iron Ex-protection: ATEX II 2G EExde IIC T3/T4 (motor enclosure in “d“, terminal box in „e“) Mountings: IMB3, B5, B35, B14 and B34 (last two available up to 132 frame size) Terminal box: metal; viewed from DE situated on top Cable glands in „e“ according to technical specifications Power range: Series 5AT 71-112 power range: 0.09 – 4,0 kW, series 7AT 132-280 power range: 2,2 – 90 kW Duty: S1 (for the environment from –20°C till + 40°C, up to 1000 m above sea level) Voltage and frequency : 230/400V ± 10% Δ /Y (up to 2,2 kW), 400/690V ± 10% Δ/Y (from 3 kW) and 50Hz Efficiency: In class EFF1/EFF2 Number of poles: One-speed motors: 2, 4, 6 and 8 Index of protection: IP 55 Insulation class: F (rise B, wire in class H and C) Colour tone: RAL 7030 (colour epoxy)
Other factory options Explosion protection: ATEX II 2G Exd IIC T3 Description: Motor housing and terminal box in “d”, without cable glands with explosion plugs Explosion protection: ATEX II 2G Exd IIC T3 Description: Motor housing in “d”, without terminal box with DIRECT INDUCTION of 1,5 m long cable. Explosion protection: ATEX II 2GD EExd(e) T4 IP66 T135 oC Description: Motor housing in “d”, terminal box in „d“ or “e”, for GASES and DUST Explosion protection: ATEX I M2 EExd(e I) Description: Motor housing in “d”, terminal box in „d“ or “e”, for mines and other places with small danger of mechanical damages and sitting
Design Options: other or multi-range voltages and frequencies other number of poles for one and multi-speed motors design for work through frequency converter other mounting arrangements thermal protection (PTC-thermistors or thermo-switches) double shaft extension special flanges and shaft ends terminal box on right or left side other colour tones and/or surface paints non ventilated (cooling method IC 410) windings for tropical environments space heaters fitted to the windings marine use design (ABT design) index of protection : IP56, IP65, IP66 ( for 7AT only IP56) roller bearings for duty type S2-S10 other temperature classes T1 – T4 for other environment temperatures (–20°C to + 50°C, –20°C to + 60°C) and other options based on special customer demands with EEx d(e) II protected brake with EEx d(e) II protected forced ventilation (cooling method IC416) (7AT series) with EEx d(e) II encoder All of the above features must be requested at point of quotation
Explosion Proof Motors Our explosion proof motors are certified to the highest operational and safety standards for use within the EU. Their cast iron construction makes these ac electric motors impervious to extreme changes in temperature and will localise any combustion within the unit, protecting surrounding equipment. Thoroughly insulated electrical components and advanced cooling techniques are employed to provide seamless operation in a wide range of environments.
Explosion Proof Motor Applications: Typically these explosion proof motors may be safely used as part of machinery which process or store flammable substances or operate in conditions where the electric motor may be exposed to flammable gases, combustible dusts or fibres.
Custom Requirements: TEC Electric Motors will ensure that the motor you order will satisfy your requirements by offering a range of design options which can be tailored to your requirement. These options are listed within the full description of each product. If you are unsure that any aspect of our product will meet your requirement we have an in house expert in the field who is more than happy to discuss your specific needs and help you make choose the correct motor for the job.
ATEX Motors: It is my responsibility to ensure all products are suitable for ATEX, Hazardous area applications, the NEW EEXDE motors have the increased protection on the terminal box negating the requirement for explosion proof glands. This is a great extra that is included as standard with all of our Zone 1 EEXDE motors that most of our competitors have to offer as a costly addition. We also have Zone 2 EXN and Zone 22 EXTD, so for all your Hazardous area motors, ATEX, or EEXD enquiries please do not hesitate to contact me, LEE “LEE’XDE” OVERTON.